20/20
Technical data sheet: S000092664EN-1
Updated:
Created: 03/05/2016
Catalogue number(s): 0 026 93
KNX 4 channels binary input interface
7 . parameter Setting DeSCription in the etS (continued)
7 .5 parameter window“preset Channel a~D” (continued)
7 .5 .1 jointly adjustable working mode for binary input
(continued)
7 .5 .2 .8 Shutter Control (continued)
parameter “reaction on short operation”
It is visible if the shutter control type is “2-push-button, standard”. This
parameter defines the operation with short operation.
Options: Stop/lamella up
Stop/lamella down
parameter “reaction on long operation”
It is visible if the shutter control type is “2-push-button, standard”. This
parameter defines the operation with long operation.
Options: Move up
Move down
parameter “reaction on operation”
It is visible if the shutter operation functionally type is “2-push-
button, moving [shutter]”, “2-switch-operation, moving [shutter]” and
“2-pushbutton, stepping”. It is defines the action when operation.
Different operation functionally type makes different operate action.
The former two operations functionally type is move up and down; the
last operation functionally type is stop/lamella reaction.
Options: Move up
Move down
Options: Stop/lamella up
Stop/lamella down
parameter “long operation after”
This parameter is visible if long operation activate, it is defines the
period TL here, after which an operation is interpreted as “long”.
Options: 0.3s/0.5s/…/10s
parameter “Denounce time”
This parameter is used to set the debounce time. Debouncing prevents
unwanted multiple operation of the input, e.g. due to bouncing of the
contact.
Options: 10ms/20ms/…/150ms
