6
INSTALLATION
Figure 3. LP Sense ring terminal suggested location
Figure 4. LP Connect bridge suggested mounting locations
Step 4: Attach LP Connect Bridge
The LP Connect bridge is necessary for one chair per row of seats. Each
chair is connected into the previous chair for communication, and the LP
Connect bridge is installed at the end of the row. If not installing LP Connect
bridge on this chair, skip to Step 5.
Attach the LP Connect bridge to the wood base of the chair with (2) 1.5”
wood screws using a Phillips screwdriver. Location is dependent on design
of chair. Suggested locations are depicted in Figure 4 below.
Location: outside
attached to side of arm
Location: attached to
inside of arm
