8
Step 6: Connect Cables
In Figure 6 below, Smart Motor Controller ports and associated cabling are
identified for a single chair configuration.
THE FOLLOWING STEPS CAN BE COMPLETED AT MANUFACTURING OR ONSITE.
INSTALLATION
Figure 6. Smart motor controller connections and wiring diagram.
Connector sleeves are designed for tighter fit and water
tight seal. It also reduces the risk of disconnection.
Port A: the chair button switch 8 pin to
8 pin DIN adapter connects into port A.
Port B: the LP Connect Bridge
plugs into port B.
Power Supply: connects to 8 pin
DIN to 2 pin cable from button
switch adapter.
Motor Port: LP Drive
or compatible motor.
Side Port 2: LP Sense sensor
plugs into side port #2. See
detail view above.
Side Port 1: occupancy
detection pad plugs into side
port #1. See detail view.
Side port detail view
