5
Function Testing
Please refer to section 5a. Manual Control Panel and 5b. Remote Control
to test the appliance first before installation.
Should any defects found,
please contact service team for help. Call 949 385 6588 or Email
[email protected]
4.
INSTALLATION INSTRUCTIONS
Locating the Appliance
Your new electric fireplace may be installed virtually anywhere in your
home. However, when choosing a location, ensure that the general
instructions for safety are followed.
For best results, install out of direct sunlight, water or very damp air.
Power supply service must be installed within proximity of electric
fireplace prior to finishing avoiding reconstruction.
Note:
This model can
NOT
be hard wired.
Minimum Clearance to Combustibles
Sides............................0 inch
Floor............................0 inch
Back.............................0 inch
Top (shelf or TV)..........0 inch
Front............................36 inch
WARNING! Risk of Fire!
Keep electrical cords, drapery, furnishings or
other combustibles at least 3ft. (0.9 m) from the front of the electric
fireplace.
Electrical Supply Circuit Requirements
Plan the location of the appliance so that it will have adequate electric
power. A 15 AMP, 60Hz circuit is required for 120V installation. The
appliance should ideally be located close to a suitable main socket to
enable power connection.
