9
BUTTON
NAME
FUNCTION
POWER
SWITCH
Turn the main power switch on. A long
“beep” sound will be heard when the
switch is turned at ON Position “I”.
Note:
The remote control will lost the
memory for function settings when the
switch is turned at OFF Position “O”.
FLAME
The flame will be cycled from Flame A –
Flame B – Flame C – Flame Off.
Flame A: full bright flame + little blue
Flame B: full bright flame
Flame C: half bright flame
HEATER
The heater will be cycled from Low – High
– Heater Off. The indicator light on the
bottom of the firebox (see the picture on
last page) will illuminate when the heater
is turned on. The indicator light will go out
within 10s.
Low: (●○)
High: (●●)
Note:
1.
Heater can be used without flame.
2.
The heater will work when the
temperature set by thermostat is
higher than room temperature.
3.
The fan works about 10s ahead of the
heater, and stops about 10s later than
the heater.
4.
The indicator light in the lower fuel
bed (see the picture on last page)
always illuminates when heater is on.
