2
Multi-Sensor
Quick Start Guide
1.
Product Introduction
The Multi-sensor is designed for using with scenes in home automation systems, integrate motion, light ,
temperature and humidity sensors, powered by CR123A battery or MicroUSB cable. The Motion Sensor lets
you know when movement is detected in a certain area and can trigger different actions in response to that
movement (or lack of movement). It also lets you know the ambient temperature and humidity to trigger
different actions to make you more comfort. This sensor integrated Z-Wave communication module to
connect with Z-Wave gateway, and this device can be adapted to EU(868.42Mhz) or US(908.42MHz).
If you want your Multi-Sensor to be a security device that use secure/encrypted message to
communicate in a Z-Wave network, then a security enabled Z-Wave controller is needed.
Multi-Sensor can be included and operated in any Z-Wave network with other Z-Wave certified devices
from other manufacturers and/or other applications. All non-battery operated nodes within the network
will act as repeaters regardless of vendor to increase reliability of the network.
2.
Product Appearance
Product appearance and function overview.
①
Button:
Short press reset button into learning mode, then the sensor can inclusion or exclusion from the
Z-Wave network.
