background image

Duet

LECTROSONICS, INC.

8

Installing Batteries

Power is provided by two AA batteries. The batteries 

are connected in series by a plate in the battery door.

Slide the battery 

door outward to 

open it

 

Polarity is marked on the rear panel.

Polarity markings

LCD Main Window

Battery life 

indicator

Receiver 

Name

RF Level

Audio Level

Diversity 

Activity

RF level

The triangle graphic corresponds to the scale on the 

left side of the display. The scale indicates the incom-

ing signal strength in microvolts, from 1 uV at the bot-

tom to 1,000 uV (1 millivolt) at the top.

Diversity activity

The two antenna icons will alternately light up depend-

ing on which one is receiving the stronger signal.

Battery Life Indicator

The battery life icon is an approximate indicator of the 

remaining battery life. For the most accurate indication, 

the user should select “Battery Type” in the menu and 

select Alkaline or Lithium. 

Audio level 

This bar graph indicates the level of the audio entering 

the transmitter. The 

“0”

 refers to the level reference, as 

chosen in the transmitter, i.e. 4 dBu or -10 dBV.

Содержание M2R

































Отзывы: