Duet
LECTROSONICS, INC.
20
Audio Input Type
Set independent channels to analog or digital (Dante).
NOTE: When selecting a Dante input, user must be
familiar with the Dante Controller from Audinate.
Audio Polarity
Select normal or inverted polarity for each
audio channel.
Headphone Monitor
The headphone source can be selected here or on the
front panel, using the A1, A2, B1 or B2 Buttons.
Front Panel Setup
Settings for the LCD brightness can be customized,
front panel lock can be turned on/off and startup RF
state can be selected..
Network Settings
Allows the user to set IP address or other network set-
tings when needed.
NOTE: New network settings require the unit
to reboot to take effect. Making a change and
pressing the BACK key will prompt the user to
Reboot Now, Save and Exit, or Discard and Exit.
Edit Names
Edit names to match talent for easy location in the
FlexList or easily identify multiple M2T transmitters in
a rack.
• Use UP and DOWN Arrows to select letters and
MENU/SEL to set and move cursor.
Restore Defaults
Returns all settings to the factory defaults.
About
Displays general information about the M2T,
including serial number, and the hardware, FPGA and
microcontroller firmware versions.
Links
QR codes with links to the Lectrosonics website, the
M2T User Manual online and YouTube video tutorials.
