LeCroy LSA1000 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 115

LeCroy LSA1000 Скачать руководство пользователя страница 65

5

–

22

LSA1000 Software Tools

About NET_CON

A  C  program  demonstrating  the  construction  of  a  TCP/IP
socket,  NET_CON  is  an  example  that  can  be  used  as  a
reference  for  program  development  in  either  a  Windows  or
non-Windows  environment.  The  program  is  written  using
the Microsoft Developer Studio version. 5.0. All source code
for the Windows environment can be found on the CD and in
Appendix  B  this  manual.  When  the  program  is  run,  the
LSA1000  will  return  the  ID  string  “LECROY,  LSA1000,
LSA1000000000, 01.0.0”.

For  Unix  based  workstation,  the  NET_CON  sample  program
provides  the  baseline  implementation  of  a  stable  TCP/IP
communication between the LSA1000 and the computer system.

This  API  (Applications  Programming  Interface)  sits  above  the
TCP/IP  protocol  stack  in  all  UNIX  systems  and  is  also  available  in
Windows  95  and  Windows  NT.  It  is  for  the  most  part  platform-
independent, and should allow the same source code to compile and
run on each of the supported systems.

The  more  commonly  known  WinSock  API  is  derived  from  the
original BSD sockets API and may be used to communicate with
BSD  sockets  based  systems.  WinSock  is  the  API  used  by
Netscape,  Internet  Explorer,  Telnet,  FTP,  among  others,  for  PC
communication with the Internet.

«
...
63
64
65
66
67
...
»

Содержание LSA1000




















































































































Отзывы:

Нет отзывов