LeCroy LSA1000 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 115

LeCroy LSA1000 Скачать руководство пользователя страница 38

4

–

4

Connecting to PC or Network

5. However, if the address has not already been selected, fill

in  the  IP  address  and  subnet  mask  as  shown  above.  The
subnet  mask  for  172.25.x.x  is  255.255.0.0.  If  the  computer
will  not  be  plugged  into  a  network,  the  above  address  (or
almost any address within the chosen subnet) will do. The
only address that will not work is the  same one as that of
the LSA1000 to be controlled.

6. Now click

in the TCP/IP Properties dialog box.

Depending on the operating system and version, you may
need to reboot the computer. If so, a dialog box should
alert you to this.

Making Physical Connection

To make the physical connection between the LSA1000 and the
host computer:

1. Connect the LSA1000 to the PC using a cross-over cable

(for direct connection).

2. Power the LSA1000 unit on. The green LED power

indicator on the front panel will light up.

Verifying Connection

The physical connection and the PC’s TCP/IP configuration can
be verified using the “

ping

” command, available on both

Windows™ 95 and Windows™ NT with TCP/IP network protocol
installed. In order to check the network connection between the
PC and the LSA1000:

3. Start MS-DOS Prompt

4. Type

ping <

ip_address

>

where

<

ip_address

>

is the

static address assigned to the LSA1000. The dialog box
on the next page illustrates the result of a successful
“ping”, with the Ethernet connection shown established.
The IP address of the LSA1000 in this case is 172.25.1.2,
the factory default address.

Note:

If your PC does not

have TCIP/IP, see the
dedicated Windows™ 95
or NT User’s Manuals for
installation instructions.

«
...
36
37
38
39
40
...
»

Содержание LSA1000




















































































































Отзывы:

Нет отзывов