LeCroy LSA1000 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 115

background image

3

–

3

No voltage selection is required, since the instrument automatically
adapts to the line voltage present.

Fuses

The power supply of the LSA1000 is protected against short-circuit
and overload by me

ans of two 5x20mm“T”-rated 5 amp, 250 V AC

fuses, located above the mains plug on the rear panel.

Disconnect the power cord before inspecting or replacing a fuse.
Open the fuse box by inserting a small screwdriver under the plastic
cover and prying it open.

WARNING

For continued fire protection at all line voltages, replace only
with fuses of the specified type and rating (see above).

For continued fire protection at all line voltages, replace only with
fuses of the specified type and rating (

see above).

Ground

The  LSA1000  has  been  designed  to  operate  from  a  single-phase
power  source,  with  one  of  the  current-carrying  conductors  (neutral
conductor)  at  ground  (earth)  potential.  Maintain  the  ground  line  to
avoid an electric shock.

None of the current-carrying conductors may exceed 250 V rms with
respect to ground potential.  The LSA1000  is provided with a three-
wire  electrical  cord  containing  a  three-terminal  polarized  plug  for
mains  voltage  and  safety  ground  connection.  The  plug's  ground
terminal is connected directly to the frame of the unit. For adequate
protection against electrical hazard, this plug must be inserted into a
mating outlet containing a safety ground contact.

Cleaning and Maintenance

Maintenance and repairs should be carried out exclusively by a
LeCroy technician (

see

Chapter 1

). Cleaning should be limited to the

exterior of the instrument only, using a damp, soft cloth. Do not use
chemicals  or  abrasive  elements.  Under  no  circumstances  should
moisture  be  allowed  to  penetrate  the  instrument.  To  avoid  electric
shocks,  disconnect  the  instrument  from  the  power  supply  before
cleaning.

CAUTION

Electric shock hazard: To avoid personal injury, do not
remove covers. No user-serviceable parts inside. Leave
repair to qualified personnel.

Power On

Connect the instrument to the power outlet and switch it on using the
main On/Off switch, located on the rear panel followed by the

«
...
30
31
32
33
34
...
»

Содержание LSA1000




















































































































Отзывы:

Нет отзывов

Похожие инструкции для LSA1000

DigitalFlow XMT868i

Бренд: Panametrics Страницы: 74

Бренд: HANYOUNG NUX Страницы: 4

Бренд: jenway Страницы: 30

Бренд: National Meter & Automation Страницы: 24

Бренд: Lakeshore Страницы: 2

Бренд: Kamstrup Страницы: 4

Бренд: Tactical Controls Страницы: 11

Бренд: FarmChem Страницы: 8

Бренд: Yamaha Страницы: 14

Disklavier Mark II XG Series

Бренд: Yamaha Страницы: 12

Бренд: Armstrong Monitoring Corporation Страницы: 12

Бренд: Veeco Страницы: 349

Бренд: GrainPro Страницы: 7

Бренд: Caen Страницы: 50

micro-TRI-gloss ?

Бренд: BYK Страницы: 174

Бренд: Caen Страницы: 63

Бренд: Caen Страницы: 35

Бренд: Hanna Instruments Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды