Leadvision Pool Fence, Руководство по установке

Страница: 3 / 13

3
STEP 1: LAYOUT & MARK-OUT
*Layout: The fence should be a minimum 24” off the pool edge. See Fig. 1 & Fig. 2
Step 1: Layout & Mark-Out
*Layout: The fence should be a minimum 2’ off the pool edge. See
Fig.1&Fig.2
*Start Point: Is the manual opening to enter the pool area. See Fig 1 Use the double
hole on the section template provided and mark your first hole 1L Fig3. 1L is for the
1 st pole of the full section going to the left side of the pool.
*Now place the template over the mark 1L that you just marked and mark your next
hole, 1R Fig.4 1R is for the 1 st pole of the full section going to the right side of the
pool.
Mark Out:
*Once both holes of the start point are marked,(1L & 1R)place the template provided
over 1R Fig.5.
*Then place the template over 1R and mark your second hole for that section( Fig.5a )
Step 1: Layout & Mark-Out
*Layout: The fence should be a minimum 2’ off the pool edge. See Fig.1&Fig.2
*Start Point: Is the manual opening to enter the pool area. See Fig 1 Use the double
hole on the section template provided and mark your first hole 1L
Fig3.
1L is for the
1 st pole of the full section going to the left side of the pool.
*Now place the template over the mark 1L that you just marked and mark your next
hole, 1R Fig.4 1R is for the 1 st pole of the full section going to the right side of the
pool.
Mark Out:
*Once both holes of the start point are marked,(1L & 1R)place the template provided
over 1R
Fig.5.
*Then place the template over 1R and mark your second hole for that section( Fig.5a )
Step 1: Layout & Mark-Out
*Layout: The fence should be a minimum 2’ off the pool edge. See Fig.1&Fig.2
*Start Point: Is the manual opening to enter the pool area. See Fig 1 Use the double
hole on the section template provided and mark your first hole 1L Fig3. 1L is for the
1
st
pole of the full section going to the left side of the pool.
*Now place the template over the mark 1L that you just marked and mark your next
hole, 1R Fig.4 1R is for the 1
st
pole of the full section going to the right side of the
pool.
Mark Out:
*Once both holes of the start point are marked,(1L & 1R)place the template provided
over 1R Fig.5.
*Then place the template over 1R and mark your second hole for that section( Fig.5a )
Step 1: Layout & Mark-Out
*Layout: The fence should be a minimum 2’ off the pool edge. See Fig.1&Fig.2
*Start Point: Is the manual opening to enter the pool area. See Fig 1 Use the double
hole on the section template provided and mark your first hole 1L
Fig3.
1L is for the
1 st pole of the full section going to the left side of the pool.
*Now place the template over the mark 1L that you just marked and mark your next
hole, 1R Fig.4 1R is for the 1 st pole of the full section going to the right side of the
pool.
Mark Out:
*Once both holes of the start point are marked,(1L & 1R)place the template provided
over 1R Fig.5.
*Then place the template over 1R and mark your second hole for that section( Fig.5a )
Step 1: Layout & Mark-Out
*Layout: The fence should be a minimum 2’ off the pool edge. See Fig.1&Fig.2
*Start Point: Is the manual opening to enter the pool area. See Fig 1 Use the double
hole on the section template provided and mark your first hole 1L
Fig3.
1L is for the
1 st pole of the full section going to the left side of the pool.
*Now place the template over the mark 1L that you just marked and mark your next
hole, 1R Fig.4 1R is for the 1 st pole of the full section going to the right side of the
pool.
Mark Out:
*Once both holes of the start point are marked,(1L & 1R)place the template provided
over 1R Fig.5.
*Then place the template over 1R and mark your second hole for that section( Fig.5a )
*Start Point: Is the manual opening to enter the pool area. See
Fig. 1
Use the double hole on the section tem-
plate provided and mark your first hole 1L
Fig. 3
. 1L is for the 1st pole of the full section going to the left side
of the pool.
*Now place the template over the mark 1L that you just marked and mark your next hole, 1R
Fig. 4
1R is for
the 1st pole of the full section going to the right side of the pool.
MARK OUT:
*Once both holes of the start point are marked,(1L & 1R)place the template provided over 1R Fig. 5.
*Then place the template over 1R and mark your second hole for that section (Fig. 5a)
24”-36” Off the Pool Edge
Fig. 1
Start Point for
Manual Opening
Minimum Dis
tanc
e
Pool Edge
Fig. 1
36”