Leadvision Pool Fence, Руководство по установке

Страница: 10 / 13

10
Hold your tape measure on the OUTSIDE THE MOLDING as shown un Fig.25 . and
make a mark on the border at the top and bottom of the fence with a marker.
Using your scissord you can proceed to cut the mesh. Sliding your ruler up against the
molding to make sure you are cutting at exactly the measurement you took. See
Fig.26
Make sure the mesh is tight and remove the extra pole from the extra piece.
Fig. 24
You will be cutting after the 4th
pole to the right
RIGHT LEFT
Custom
cut
Hold your tape measure on the OUTSIDE THE MOLDING as shown un
Fig.25
. and
make a mark on the border at the top and bottom of the fence with a marker.
Using your scissord you can proceed to cut the mesh. Sliding your ruler up against the
molding to make sure you are cutting at exactly the measurement you took. See
Fig.26 Make sure the mesh is tight and remove the extra pole from the extra piece.
Hold your tape measure on the OUTSIDE THE MOLDING as shown un Fig.25 . and
make a mark on the border at the top and bottom of the fence with a marker.
Using your scissord you can proceed to cut the mesh. Sliding your ruler up against the
molding to make sure you are cutting at exactly the measurement you took. See
Fig.26
Make sure the mesh is tight and remove the extra pole from the extra piece.
Hold your tape measure on the OUTSIDE THE MOLDING as shown un Fig.25 . and make a mark on the border at
the top and bottom of the fence with a marker.
Using your scissord you can proceed to cut the mesh. Sliding your ruler up against the molding to make sure you
are cutting at exactly the measurement you took. See
Fig. 26
Make sure the mesh is tight and remove the extra
pole from the extra piece.
NOTICE:
Tape measure is on the outside of
the molding
Fig. 25
Fig. 26
Remove Pole
Extra Piece