56
You can click on the handle bar on the right and
hold the mouse button down to change the
voltage of the meter pointed at by the triangle. If
you wish to make changes to a different meter,
simply click on such a meter, then the triangle will
move under the meter you just clicked on.
<Temperature>:
Click on the <Temperature> button. There will be
an information box, as shown in the first figure to
the right, showing you the current CPU
Shutdown temperature, CPU temperature and
System temperature.
<Power Supply>:
Click on the <Power Supply> button. There will
be an information box, as shown in the second
figure to the right, showing you the current power
supply status.
<Fan Speed>
Click on the <Fan Speed> button. There will be
an information box, as shown in the third figure to
the right, showing you the current CPU fan speed
and system fan speed.
6. Ppower switch of the Speed Gear utility. Click to
close this application.
7. Speed of AGP bus. This value changes in
proportion to the change of CPU’s FSB.
8. <help>
button.
Clicking
here will bring up a table
as shown in the last figure to the right. It shows
the range of each group in
<< X-BIOS II >>.
9. Speed of the CPU. This value is generated by
multiplying the value of CPU’s FSB and the value
of Ratio.
10. Vcore of the CPU. This can only be altered in <<
X-BIOS II >> menu.
11. As the clock-multiplier of the CPU is locked, the
CPU ratio cannot be changed.
12. Speed of PCI bus. This value changes in
proportion to the change of CPU’s FSB.
