10
support for the optional wireless transmitting and receiving infrared module. CIR1
connector is for CIR; IR1 connector is for IR.
MIC, Line In, Line Out
Mic
: Allows microphones to be connected for inputting sound.
Line In
: Allows tape players or other audio sources to be recorded by your
computer or played through the Line Out.
Line Out
:
Connected to headphones or speakers with amplifier.
WinFast K7NCR18D series also can support 6 speakers
audio-output, but Mic and Line In have different functions here as
below:
Mic
: Center speakers and subwoofer connected to Mic.
Line In
: Rear speakers connected to Line in.
Line Out
:
Front speakers connected to Line out.
NOTE: Because WinFastK7NCR18D/G Pro 2 has WinFast FAL, you can use
6-sound stereo directly without six speaker setup steps in the next
two pages.
Please refer to the following steps to setup the speakers:
Step 1:
Click the “Start“ icon on the
down-left corner of the screen,
then select “Setup” and
“Control Panel”. Behind “Pick a
Category”, choose “Sound,
Speech, and Audio Devices”.
Step 2:
In “Pick a task”, click “Adjust
the system volume” to
increase or decrease the
volume of sounds associated
with system events such as
incoming e-mail.
