25
Power ON Function [BUTTON ONLY]
Allows you to choose a way to power on. The options include
Password
,
Hot KEY
,
Mouse Left
,
Mouse right
,
Any KEY
,
BUTTON-ONLY
, and
Keyboard 98
.
KB Power ON Password [Enter]
This setting item allows you to set a password for keyboard powering on.
Hot Key Power ON [Ctrl-F1]
Allows you to choose one of the hot keys to power on from F1 to F12.
Onboard FDC Controller [Enabled]
This setting item allows you to enable or disable the onboard FDC controller.
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the 1st and 2nd serial ports. The
choices:
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled, and Auto.
UART Mode Select
Select an infrared port mode. The options are:
Normal
,
IrDA
,
ASKIR
,
and
SCR
.
RxD, TxD Active
The options are:
Hi,Hi
,
Hi,Lo
,
Lo,Hi
,
and
Lo,Lo.
IR Transmission Delay
The options are:
Enabled
and
Disabled
.
UR2 Duplex Mode
This item selects the IR function when the choice of the UART mode is ASKIR. The
options are:
Full and
Half
.
Use IR Pins
The options are:
RxD2,TxD2
and IR-Rx2Tx2
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with
which I/O address. The options are:
378/IRQ7, 278/IRQ5, 3BC/IRQ7, and
Disabled.
Parallel Port Mode
Select an operating mode for the onboard parallel port. Normal EPP (Extended
Parallel Port) ECP (Extended Capabilities Port) ECP+EPP PC AT parallel port
Bi-directional port Fast, buffered port Fast, buffered, bi-directional port.
Set to
Normal
unless you are certain your hardware and software both support
EPP or ECP mode. The options are:
SPP
,
EPP
,
ECP
,
and
ECP+EPP
.
EPP Mode Select
The options are:
EPP 1.7
and
EPP 1.9
