Leach 2R-II, Руководство оператора

Страница: 41 / 50

OPERATION
SECTION 3
PUSHOUT PANEL OPERATION DURING PACKING
TELESCOPIC PUSH OUT
The 2RII Packmaster telescopic pushout cylinder will
normally move toward the front of the body automati-
cally. When the resistance circuit is adjusted to
produce maximum load density, it may become
necessary to manually retract the telescopic pushout
cylinder in order to allow the compacted refuse to
move forward in the body. Also, if the packer panel
stops short of the “home” position, the carrier panel
operating lever may need to be held (overridden) to
allow the refuse to move the pushout panel toward the
front of the body. When the pushout panel has reached
the front of the body, neither the packer panel operat-
ing lever nor the carrier panel lever should be overrid-
den except to clear the final hopper load.
DISCONNECTING THE CONTAINER
Once the container is empty, it should be lowered to the
ground, the latch arms released and the cable discon-
nected.
DISCONNECTED
PUSHOUT LEVER
ENGINE SPEED UP
BUTTON
3-16