Leach 2R-II, Руководство оператора

Страница: 19 / 50

INTRODUCTION
SECTION 2
The main purpose of the 2RII Packmaster is to safely and effi-
ciently: load, compact, transport and unload refuse. The following
describes how the unit performs those tasks in the most basic
terms. For a more detailed description of the unit and its com-
ponents, read the complete 2RII PACKMASTER SERVICE
MANUAL. Before going further, look at the accompanying
full page illustration of the 2RII Packmaster and become
familiar with the terms you will need to know.
LOADING
Refuse is first loaded into the hopper of the tailgate
assembly. The carrier and packer panels, which
sweep up and pack the refuse from the hopper, will
be in the “home” position.
COMPACTION
When the operator starts the packing cycle the carrier
and packer panels move rearward, over the load.
Next, the carrier and packer panel automatically
stop at the “interrupted cycle” position.
CARRIER & PACKER PANELS MOVE OVER LOAD
“INTERRUPTED CYCLE”
"HOME" POSITION
CARRIER
PANEL
PACKER
PANEL
PACKER
PANEL
CARRIER
PANEL
2-2