LEAB Automotive -CPC
Page - 16 -
LEAB Automotive GmbH
3.2
Dimensional drawing
Fig. 3 Dimensions CPC 600W/800W (left) and CPC 1600W (right)
4.
Installation
The LEAB CPC has been designed primarily as a built-in battery charger but it can also be used as a
transportable service battery charger. The sturdy rubber corners make stable yet vibration-absorbing
attachment possible, allowing it the be set down or mounted to sensitive surfaces without causing any
damage.
However, since the charging cables do not have an additional strain relief fixture, we recommend
changing to the type LEAB PWC if you wish to use the device permanently as a service battery charger.
The device feet have suitable seats for attachment bolts for permanent installation, allowing the CPC to
be attached vertically or horizontally to a wall or table (see section 4.2).
All manuals and user guides at all-guides.com
all-guides.com
