Le Las 227A1AT, Руководство пользователя

Страница: 56 / 64

NFC227A*TEL2
56 /64
\\SERVEUR MAX\\ Notices NFC \ NFC227 TL2 \ NFC227A-TEL2.DOC
13. ADDITIONAL PROGRAMMING
•
The telephone can be configured, locally or remotely, for user requirements by programming codes. The
most usual programming procedures are described in Section 8.1 Basic Programming on page 48.
•
Other programming options, available to the user, are described in the present chapter. The remote-
control codes facilitating particular functions are listed below. As a rule, all these codes are 4-digits
enveloped by two stars (*), with the exception of autodial number memories.
•
These functions are accessed by an "access code" which can be specific to the user.
•
Programming code STATUS
*10xx* Hardware configuration
For each function a value (xx) is designated
xx = 00 DTMF dialling
xx = 01 Pulse dialling
xx = 02 No direct memory access
xx = 04 No cleardown on tone
The sum of these values determines the overall configuration.
Example:
⇒
*1000* = DTMF di access to memory 0-9 on keying the corresponding button on the keypad
+ automatic cleardown on busy tone.
⇒
*1007* = Pulse di no memory no automatic cleardown.
•
Programming code Ringin g
*11xx* Number of rings before auto-answer
xx = 00 No ringing before auto-answer
Up to xx = 98 98 rings before auto-answer
Factory setting xx = 99 The telephone does not auto-answer
Note: 00 ringing, reserved for the remote diagnostics system.
•
Programming code Time On-Line
*12xx* Duration of conversation before auto-cleardown
Factory setting xx = 00 The telephone is not limited to any duration
xx = 04 Auto-cleardown after 4 minutes
Up to xx = 99 Auto-cleardown after 99 minutes