Le Las 227A1AT, Руководство пользователя

Страница: 51 / 64

NFC227A*TEL2
51 /64
\\SERVEUR MAX\\ Notices NFC \ NFC227 TL2 \ NFC227A-TEL2.DOC
9.
BASIC PROGRAMMING
The sequence of buttons to be keyed on the keypad of a remote telephone, DTMF type, connected to the
telephone to be programmed.
Take care during programming, the presence of busy tone can clear down the telephone automatically.
IMPORTANT: Before any programming, key the access code :
*
1 2 3 4
*
A
UTODIAL NUMBERS
(M1)
Key the combinaison:
*
5 0 0 1
*
# 1 1 # <N>
*
< N > autodial number from 1 to 15 digits.
During memory programming , the combination #11# represents the recognition of a continuous tone with a
frequency of 440 Hz
±
100Hz (standard) before dialling.
This is the standard for UK and many other countries but in some other countries #10# may be applicable
instead, whereby a 2-second pause is inserted rather than tone recognition.
A
UTODIAL NUMBERS
(M0
TO
M9)
(
HANDS
-
FREE TELEPHONES
)
Key the combinaison:
*
5 0 0 <M>
*
# 1 1 # <N>
*
< M > number of memory from 0 to 9 affected with the buttons 0 to 9
With the exception of the stations has two buttons or button 2 is affected at the M5.
•
Remotely checked phones : 8 memories M1 to M8 available by pushing keys 1 to 8 without pushing call
button.
•
Phones without remotely checked facility : 10 memories M0 to M9 by pushing keys 0 to 9 without
pushing call button.
NOTE
F
OR FULL KEYPAD TELEPHONE
,
THE MEMORY
M1
CAN BE ALLOCATED TO THE BUTTON
P
ROGRAMMING OF THE
« R »
BUTTON
For full keypad telephone, to assigne button to memory M1 key the combinaison:
*
2 4 0 0
*