Le Las 227A1AT, Руководство пользователя

Страница: 53 / 64

NFC227A*TEL2
53 /64
\\SERVEUR MAX\\ Notices NFC \ NFC227 TL2 \ NFC227A-TEL2.DOC
P
ROGRAMME A NUMBER CHAIN
(
HANDS
-
FREE TELEPHONES
)
For the programming of several memories, key the combinaisons:
*
5 0 0
<
M
> *
# 1 1 # <N>
*
M (memory) = 1, 2, ...., 8 max
N= Call number up to 15 digits
The chain always starts with the basic storage assigned to the button and stop at the first empty memory.
To program a memory empties (or to erase a number) it is necessary to type:
*
5 0 0 <M>
* *
To program the interval between memory auto-dial attempts
T1 between M1 – M2 and
T2 between M2 – M3, M3 – M4 etc… if necessary
These times are the intervals in the event of no-answer
Before dialling the next number.
For T1 key
:
*
2 0 T T
*
TT is the time in seconds. If only one number TT=00
If chaining 2 or several numbers, 2 choices are possible :
a) to hear what actually happens on the line : program T1/T2 with even number (e.g., :30 sec)
b) to mask what happens on the line (no-answer, busy tone,…) until the called party picks up, by simulating
ringing and flashing LED. On detection of speech from the called party, a long beep announces to both parties
that the communication has been established, the LED shows constant. For this, program T1/T2 with an odd
number (e.g. 31 sec.)
For T2 key :
*
2 1 T T
*