14
EN
E-72
L-12
E-48
G-8
E-60
L-12
M-
24
E-48
E-42
E-42
24
E-36
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
18
E-48
E-36
E-48
E-36
E-48
24
LMV2370HD/LMV2370HG
LSV4740H
LMV1380D
LMV1950DC
LMV2550D
Alternative arrangement
Additional racks (fixed or sliding)can be purchased from your
dealer or after-sales centre to increase the flexibility of your
appliance.
Open the drawer completely and unscrew the two fixing screws
(G1)
. Pull the drawer forward to release it from the runners.
Removing the drawer brackets (A1.1)
Pull the bracket (B) upwards to remove the front clip from the
side wall, pull the bracket towards you to remove the rear clip
(A).
Repeat the operation with the bracket on the other side.
Inserting drawer brackets (A1.1)
Note: pay attention to the positioning, on the right or on the left,
E-36
E-48
L-12
E-48
G-8
E-36
L-12
M-24
E-36
L-12
L-12
L-12
L-12
L-12
L-12
E-24
G-8
E-24
L-12
M-24
of the brackets.
Align the rear clip with the desired hole, push backwards (A) so
that the clip fits completely into the slot.
Align the front clip with the desired slot and push down (B) to fit
the clip fully into the slot.
Make sure that the rack is stable with the side wall.
Inserting a drawer(A1.1)
Position the drawer on the runners, push the drawer in.
Pull out the drawer and the movable runners, fit the fixing screws at
the front
(E)
.
Make sure that the brackets have the vibration dampers
installed, put the fixed rack
(G1)
above the dampers, slide
backwards so that it fits.
Inserting a fixed shelf bracket (A1.2)
Note: pay attention to the positioning, on the right or on the left,
of the brackets.
Align the rear clip with the desired hole, push down to fit the clip
fully into the slot (A).
Align the front clip with the desired slot and push down to fit the
clip fully into the slot (B).
Make sure that the rack is stable with the side wall.
Содержание LMV1380D
