LDR 20102622, Руководство по эксплуатации

Страница: 4 / 10

ENGLISH
The following instructions will show you the correct sequenze to assemble multiple rows of
the Rima floods. Please carefully follow the instruction drawings on the centre pages of
this booklet to make sure the multiple rows you are assembling are mechqnically safe.
For a correct usage of the Rima floods, you are kindly requested to read the relevant
instruction manual supplied with each luminaire.
LDR declines any responibility in case of damages to objects or persons caused by
improper assembling of the multiple rows. In case of doubts or problems we suggest you
contact our tehcnical staff at
+39 0376 781 193
Check box contents
Please make sure the box contains the following components
2 x L-shaped stirrups (F)
2 x joining rods (A) complete with cross head screw 4x12 and plain washer 4x16
6 x cross head screws 4x12 (C)
2 x threaded stirrup holder (G) complete with nut head screw 8x25
2 x metal plain washer 8x24 (H)
2 x metal plain washer 4x16 (E)
2 x teflon plain washer 8x16 (B)
2 x female knob (I)
Should one or more items miss, we kindly ask you to contact your LDR dealer immediately
Assembly of the multiple rows
1 Remove the Rimas form their packing and position them on a work bench
2 Make sure you have a manual or battery screw driver with cross head terminal
3 Carefully follow the instruction drawing on page
CAUTION
Start from action 1 if you have purchased Rima floods with stirrup
Start from action 5 if you have purchased Rima floods without stirrup