2.1 INDICATORS
2.1.1 SYSTEM STATUS INDICATORS
The status indicators show at all times
the working condition of the equipment or
system. They are located in the upper right
corner of the equipment.
(a) EMG: “EMERGENCY”
Active (on) when the system is in emergency
operation state (voice alarm). Under this state,
the MPS 8Z may not be able to make live PA
live messages, as it has been con figured in the
system (see NEO system con figuration
manual). Red color.
(b) FLT: “FAULT”
Active (on) when the system is in a fault state.
This indicator is activated automatically after
the failure detection of any of the supervised
functions. Yellow color
(c) LINK: “LINK”
Active (on) when the equipment is linked to the
system. It will blink while the process of linking
to the system or there is a link failure between
the equipment and some element of the
distributed system. If the problem persists, see
chapter 6.4 for resolution. Yellow color
2.1.2 STATUS INDICATORS OF THE CALL CHANNEL
The status indicators per channel, show at all times their status or operating condition.
(d) BSY: “BUSY”
Active (on) when the call channel is occupied by another device with higher priority in the
ACSI bus. When during a voice announcement, the call channel is occupied by a device with
a higher priority, it will light up intermittently, indicating that the call has been canceled. Red
color.
(e) CW: “CONCEDED WORD”
Active (on) when the call channel is assigned and free to be able to make a PA voice
announcement. When the pre-warning tone is active on the equipment, it will flash
intermittently while it is playing. Green color.
Complementary to this indicator, the MPS 8Z includes an illuminated ring located in the
microphone capsule that shows when the user can begin to make the voice message. Red
color.
(f) ZONE x: “ZONE x”
Active (on) when the memory or zone memories X have been selected. Green color
2
www.lda-audiotech.com
Picture 1: Indicators
