NOTE: If different messages are issued before 15 seconds, the recording may not be
done to protect the memory. In this case when you press “RECALL” key, “BSY” indicator will
automatically light up showing there is no recorded message.
3.4 SYSTEM EVENT
The desktop microphone MPS 8Z allows to launch system events, such as pre-recorded
messages issuance, sound sources assignment, zone volume control, etc. To assign system
events to zone memory selection buttons of the MPS 8Z, see the software con figuration User's
Manual of NEO system.
3.4.1 LAUNCHING SYSTEM EVENTS
To launch a system event press the “event” control. The “CW” and “BSY” indicators will
light up simultaneously. Then select the desired event by pressing the zone memory button where
it is assigned. Then push “TALK” to con firm or “CANCEL” to cancel. If the system has been able
to launch the event, the “CW” indicator will blink twice.
4 CONNECTION AND SETTING UP
4.1 POWER SUPPLY
The MPS 8Z is provided with an external power supply of 5V DC A female USB connector,
which is connected by a male AB miniUSB cable to a male A USB, also provided. It can be used
to supply the equipment or it can also be supplied directly from the ACSI bus. In this case keep
power supply for later use.
4.1.1 POWER SUPPLY SELECTOR
The equipment has a “PWR” selector that
allows you to choose the energy source between
local or provided through the ACSI bus. When the
selector is in OFF position, the equipment will be
locally supplied by the external charger. When
the
selector is in ON position, the MPS 8Z will be
supplied from the ACSI bus. If the external
charger is connected, it will switch automatically if
the
ACSI bus power is interrupted.
LDA Audio Tech – 31 Severo Ochoa - 29590 MALAGA, Spain. Tel: +34 952028805
7
User's Manual: MPS 8Z
Picture 4: Power supply selector
