LCSI IPK-108, Инструкция по установке и эксплуатации, Страница: 29 / 33

29
Chapter 4 KVM over IP Module (Optional)
The CAT5 KVM supports a KVM over IP Module. To install it, you can manage your CAT5 KVM connected
computers from anywhere in the world. For more details, please refer to the KVM over IP Guide.
4.1 KVM over IP Module Installation
Turn off the CAT5 KVM first, and then slide the KVM over IP Module into Module Port on CAT5 KVM gently.
Make sure the
KVM over IP Module is installed on CAT5 KVM firmly, then secured it on CAT5 KVM with
screw.
4.2 Remote Wakeup
The IP-KVM provides the remote power wakeup function, which can remotely wake up the sleeping computer.
With this feature, the computers that are not in use for now can be shut down and remotely wake up the
computer when want to use it, and thus save the power energy.
Figure 0-1 Remote Wakeup
Settings on target computer:
In order to be waked up, some settings have to be done on the target computer:
1. BIOS setting:
Have the wake up function in BIOS Enabled
Note: the naming in BIOS varies depending on the BIOS type; it may be Wake On LAN/PME , PME
Event Wake Up , or Power On By PCI Device .
2. Windows Settings:
Enter the Properties of Local Area Connection.
To add KVM over IP Module here