LCSI IPK-108, Инструкция по установке и эксплуатации, Страница: 16 / 33

16
kept unless you manually modify/delete it or attach another KVM Dongle to that port.
F3: Secu (Security)
This function protects individual computers from unauthorized KVM access; by default it is disabled. To enable,
high-light the computer you want to protect then press < F3 >.
A “!” mark shows that the Security function is
enabled.
To access a
“!” locked computer, highlight it and press <
ENTER >; the admin password challenge appears.
After entering the correct password, you are allowed to control the selected computer. The computer is
automatically re-locked once you switch to another computer.
To disable the password-protected function, just select the computer and press < F3 > again, enter the correct
password.
Note: The Password-protected com
puters (“!” marked) are skipped during [Auto Scan] and [Manual
Scan] mode.
F5: Manu (Manual Scan)
Press < F5 > to enter [Manual Scan] mode. A label similar to the following appears:
In this mode, you can scan powered-on computers one by one by keyboard control. Press the <
↑
> to select
the previous computer and the <
↓
> arrow to select the next computer. Press the <
←
>, <
→
> to change the
position of the scanned computer information box.
To abort [Manual Scan] mode, press < ESC >.
F6:

(Check Mark)
This is a scan filter. In order to limit [Auto Scan] or [Manual Scan] to certain computers, give those computers a
checked mark
“  ”. To set, highlight the computer, and press <
F6 > to toggle the
mark on or off. Use “Scan
Type” to set up scanning so it includes just those computers you checked.