LCSI IPK-108, Инструкция по установке и эксплуатации, Страница: 15 / 33

15
3.2.2 OSD Hot-Key Functions
F1: Auto (Auto Scan)
In this mode, the console automatically switches from one powered-on computer to the next sequentially in
fixed interval time. During this [Auto Scan] mode, the OSD will display the name of computer scanned.
During this mode, you may press < Space > or < Enter > key anytime to access the scanned computer. Press
< Esc> to abort the [Auto Scan] mode, and into OSD Main Menu. You may press
<↑>
or
<↓>
key to enter a
[Manual Scan] mode. You will see the following screen.
In [Manual Scan] mode, you may scan powered-on computers one by one by keyboard control. Press
<↑>
to
previous computer and the
<↓>
to select the next computer. Press <
←
>, <
→
> to move OSD displayed
position.
To abort [Manual Scan] mode, press < ESC >.
F2: Name (Port Name)
To help remember which computer or Slave CAT5 KVM is attached to a particular port, every KVM port of
CAT5 KVM can be given a name. To edit name of a computer, press < F2 >, up to 8 / 16 characters. Valid
characters are „A‟~‟Z‟, „0‟~‟9‟ and „-„. Lowercase are converted to uppercase ones. Once the port name is given,
it will be saved in KVM Dongle. If you change the KVM Dongle, however, the old port name for that port will be