LCSI IPK-108, Инструкция по установке и эксплуатации, Страница: 20 / 33

20
NOTICE:
IF the default value of
「
ACPI Suspend Type
」
item isn
‟t [S1], please follow the steps to change the setting:
1. Press < Enter > to open the item value choosing window.
2. Please move the square to S1(POS), then press < Enter > to change the value and back to the
「
Power Management Setup
」
setup page.
3. You confirm the value of
「
ACPI Suspend Type
」
item has already changed to [S1(POS)] at the
「
Power Management Setup
」
setup page. Press
<
F10
>
to save the changes, the confirmation window will pop out as shown above, enter
“Y” and then press
< Enter
>
to confirm the change and reboot the system.
4. The way of set the value of
「
ACPI Suspend Type
」
item at [S3(STR)] is similar to set up [S1(POS)] process. It will cause the
computer unable to been wake up by ACPI commands but can only been wake up by press the power switch.