10
Mounting & Rigging
This fixture can be mounted in any orientation (vertical, horizontal). Always
make sure there is adequate ventilation and no flammable surfaces within 2
feet (.6 meters) of the fixture. You can mount the fixture using fixture clamps
or with threaded bolt type hardware. Always install the included safety eyebolt
and cable when mounting in overhead or wall locations (see images below for
reference).
Warning: Do not mount the fixture in the ventilation path of a nearby
heating supply duct. The heated airflow will cause fixture failure due to
overheating
SAFETY EYEBOLT & CABLE
Install the included eyebolt into the threaded hole on the back of the housing
(see images above). Then install the safety cable to the eyebolt. Anchor the
safety cable to the truss or other secure mounting surface. Overhead and wall
installations should be performed only by qualified professionals. Incorrect
installations can result in personal injury or death, or damage to property.
Always use lock-washers on all installation hardware. Also use a thread-locking
Содержание Thunder 400
Страница 7: ...6 Figure 3 Setting on the floor ...
