2
1.GETTING STARTED
UNPACKING
• 1 x LED Strobe
• 1 x Base Plate /Mounting Brackets
• A Sweet Safety Cable & eyebolt
• A Power Cord
• User Manual
Carefully
check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your unit for
damage and be sure all accessories necessary to operate the unit have arrived
intact. In the event damage has been found or parts are missing, please
contact our customer support team for further instructions. Please do not return
this unit to your dealer without first contacting customer support at the number
listed below.
INTRODUCTION
Congratulations, you have just purchased one of the most innovative
and reliable lighting fixtures on the market today! Please read and understand
the instructions in this manual carefully and thoroughly before attempting to
operate this unit, This manual contains important information regarding safety
protocol that must be strictly adhered to at all times.
Powering Up!
All fixtures must be powered directly off a switched circuit and
cannot be run
off a rheostat (variable resistor) or dimmer circuit, even if the rheostat
or dimmer channel is used solely for a 0% to 100% switch
.
AC Voltage Switch -
Not all fixtures have a voltage select switch, so please verify that the
fixture you receive is suitable for your local power supply. See the label on the fixture or
refer to the fixture’s specifications chart for more information. A fixture’s listed current
rating is its average current draw under normal conditions. Check the fixture or device
carefully to make sure that if a voltage selection switch exists that it is set to the correct
line voltage you will use.
Warning!
Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your fixture may result if the line voltage applied
does not match the voltage indicated on the voltage selector switch. All
fixtures must be connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, please contact your dealer.
Disclaimer:
The information and specifications contained in this document are subject to
change without notice. We assumes no responsibility or liability for any errors or
omissions that may appear in this user manual. We reserves the right to update the
existing document or to create a new document to correct any errors or omissions at any
time. You can get the latest version of this document from your dealer.
Содержание Thunder 400
Страница 7: ...6 Figure 3 Setting on the floor ...