LCG Thunder 400, Руководство пользователя

Страница: 19 / 19

18
5. APPENDIX
MAINTENANCE
ALWAYS DISCONNECT POWER BEFORE CLEANING
NEVER REMOVE THE GROUND PRONG FROM POWER CORD
NEVER SPIN A FAN WITH COMPRESSED AIR,
this can damage components in your fixture
Your fixture will require regular cleaning to prevent a build up of dust and smoke debris
on the optics and housing. After disconnection of power, wipe down the fixture with a
damp cloth. Never use alcohol or solvents as this may damage the finish. Use glass
cleaner for glass surfaces such as external lens or mirrors. A dry paint brush is an
excellent tool to remove surface dust.
Be sure to periodically check for loose parts that could damage the fixture or potentially
allow the fixture to cause injury. Make sure all overhead and wall installations have a
secondary safety device installed such as a safety cable rated for your fixture type and
size. Check the power cord as well, make sure there is no damage that could cause
electrical shock, never remove the ground prong.
There are no user-servicable parts in this fixture. Do not attempt to open and repair this
fixture. Return to the factory for repair.
Tech Specs!
Weight & Dimensions
Width 17.8 in (45 cm), Base: 15.7 in (39.8 cm)
Depth 3 in (7.4 cm), Base: 6.3 in (15.8 cm)
Height 11.25 in (28.6 cm)
Weight 16.5 lbs (7.5 kg)
Power
Operating Voltage 100-240VAC 50/60Hz
Power Consumption 400W Max, 5A, pf: .75
Light Source
LED 1,452 white SMD LEDs, 50,000 hrs.
Optical
Beam Angle 120 degree
Luminous 37000LM
Thermal
Max.Operating Temp. 104 degrees F (40 degrees C) ambient
Control
Protocol USITT DMX-512
DMX Channels 1/3/4/6/7/9/16 Channels
Input 3/5-pin XLR Male
Output 3/5-pin XLR Female
Operating Modes Standalone, Master/Slave, Auto Mode
Other Information
A lot of things look cooler in slow motion. Eating isn’t one of them.
Warranty 1-year limited warranty