LazyMan A4TS, Инструкция по использованию и уходу

Страница: 8 / 39

OPEN HEARTH SERIES ISLAND INSTALLATION
NOTE: Use this INSTALLATION section in conjunction with the following ‘GAS CONNECTIONS’ section of this manual to
assure that all gas considerations have been made before installing your grill.
INSTALLATION METHOD #1- USING NG GAS: After the island has been constructed and built per the previous cutout
recommendations and guidelines (method #1), it’s now time to install the LazyMan ATS Series Open Hearth grill into the
island. The above diagram shows a typical Natural Gas installation where the gas piping is routed through the back of
the island and externally to the gas source. This routing can also be accomplished internally (inside the island) if the
island is constructed with a hollow design and there is space between the back wall of the cutout and the back wall of
the island. This grill is shipped with a 1/2 NPT Elbow (female) fitting at the end of the gas manifold for both NG and LP
hose connections.
For this installation method, carefully rotate this elbow (using a pipe wrench) toward the rear facing straight back.
Elbow Turned Toward Rear
4