LAZBOY Premier Series, Руководство пользователя

Страница: 52 / 60

52
For HELP, call La-Z-Boy
®
Hot Tubs at 1.800.465.2933.
No message on display. Power has
been cut off to the spa. The control panel will be disabled until
power returns. Spa settings will be
preserved until next power up.
- -
Temperature unknown. After the pump has been running for 2
minutes, the current water temperature
will be displayed.
Hr
An internal hardware error has
been detected. Restart the spa pack and start & stop all
pumps and blowers. If the error reap-
pears, replace the spa pack.
Prr
The “Prr” error message indicates a
problem with the regulation probe.
The system is constantly verifying if
the temperature probe reading is
within normal limits. Verify if the regulation probe is properly
connected. Replace the heater if the
problem persists. Replace the spa pack
if the problem persists.
HL
The water temperature at the heat-
er has reached 119F.
Do not enter
the spa water.
Measure the water temperature and
compare the reading. Check for flow ob-
structions. Call for service.
FLO
The system did not detect any wa-
ter flow while the circulation pump
was running. Make sure water valves are open. Check
the filter for blockages. Make sure there
are no air locks in the system.
UPL
No low level configuration software
has been downloaded into the sys-
tem. Call for service to upload the program-
ming software.
AOH
Temperature inside the spa skirt is
too high, causing the internal tem-
perature to increase above normal
limits. Make sure vents are open and opera-
tional.
Message Meaning Action Required
OH
Water temperature in the spa has
reached 108F.
Do not enter spa
water.
Measure the water temperature and
compare the reading. Remove the cover
and let the spa cool down. Add cold wa-
ter and lower the filter cycle durations.
ERROR CODES