La-Z-Time
®
PowerRecline
+
Motion-Modulars
Assembly Instructions
La-Z-Time
®
PowerRecline
+
Motion-Modulars
Assembly Instructions
9. Identify the electrical components to be used in the following assembly steps (F
IGURE
10). Components
vary by style; units with lighted cup holders have additional connections.
10. Locate the motor connector behind the power motion-modular unit (F
IGURE
11). If assembling a
unit with a lighted cup holder proceed to step 13.
11. Connect the power supply to the motor connector (F
IGURE
12).
12. Connect the 120 volt power cord to the power supply (F
IGURE
13). Do not plug in until
instructed in the
Operating Instructions
. Proceed to step 16 for units without lighted cup holders.
13. Connect the small Y-cable to the motor connector and lighted cup holder connector behind the power
motion-modular unit (F
IGURE
14).
14. Connect the power supply to the small Y-cable (F
IGURE
15).
15. Connect the 120 volt power cord to the power supply (F
IGURE
16).Do not plug in until
instructed in the
Operating Instructions
.
16. To remove the backs, unplug the 120 volt power cord from the electrical outlet and disconnect
the power supply from the motor connector behind the power motion-modular unit, or small
Y-cable if unit includes a lighted cup holder. Reverse the
Assembly Instructions
steps.
21
20
(PowerRecline
+
Motion-Modulars Assembly Instructions Continued)
PowerRecline
+
Units Without
Lighted Cup Holders
PowerRecline
+
Units With
Lighted Cup Holders
F
IGURE
10
120 Volt
Power Cord
Power
Supply
Power
Supply
120 Volt
Power Cord
Small
Y-Cable
F
IGURE
11
F
IGURE
12
F
IGURE
13
F
IGURE
14
F
IGURE
15
F
IGURE
16
Power
Supply
Motor
Connector
120 Volt
Power Cord
Power
Supply
Lighted Cup Holder
Connector (select
units only)
Motor
Connector
Make this
connection
Make this
connection
Make these
connections
Motor
Connector
Small
Y-Cable
Cup Holder
Connector
Make this
connection
Power
Supply
Small
Y-Cable
Power
Supply
120 Volt
Power Cord
Make this
connection
