25
2. INFORMAZIONI GENERALI
2.1 MANUAL PURPOSE
To make it easier to read about and look up various
subjects, refer to the table of contents at the be-
ginning of the section in your language.
This manual has been prepared by the manufac-
turer and is an integral part of the product. As
such, it must be kept in a safe place for the machi-
ne’ s en- tire service life until demolition.
The customer must ensure that machine operators
have read or are familiar with the contents of this
manual so that they strictly follow the instructions
described herein.
Constant compliance with the instructions provi-
ded in this manual is the only way to guarantee
the best results in terms of safety, performance,
efficiency and service life of the product you now
own. Non- compliance with these rules may cause
injuries to people and damage to the machine, the
scrubbed surface and the environment: in no case
can such injuries or damage be attributed to the
manufac- turer.
This manual refers in detail to the machine and
pro- vides instructions and descriptions only about
the battery and the battery charger provided.
2.2 TERMINOLOGY AND SYMBOL LEGEND
or the sa e o clarit an to e ficientl hi
-
ghlight the various aspects of the instruc-
tions provided, terms and symbols were
se that are efine an ill strate here
below:
- Machine. This definition replaces the commer-
cial name to which this manual refers.
- Operator. An operator is considered the per-
son who normally uses the machine and is fa-
miliar with its operating features but does not
have the spe- cific technical skills to work on
that machine.
- Technician. A technician is considered a per-
son who has the experience, technical educa-
tion, leg- islative and regulatory knowledge that
allows him to carry out any type of required
work, and the abil- ity to recognize and to avoid
possible risks during machine installation, ope-
ration, handling and main- tenance.
-
INDICATION SYMBOL (
☞
). Particu-
larly im- portant information to avoid ma-
chine malfunctions.
-
ATTENTION SYMBOL (
). Very im-
portant infor-
mation to avoid serious damage to the ma-
chine and to the environment in which it
operates.
-
DANGER SYMBOL (
). Vital infor-
mation to avoid serious (or extreme) con-
seq uences affecting the health of persons
and causing damage to the product and the
environment in which it operates.
2.3 PRODUCT IDENTIFICATION
The nameplate located in the backside of the ma-
chine contains the following informations:
• Manufacturer ID
• CE mark
• Model code
• Model
• Overall power rating
• Serial number
• Year built
• Weight with maximum load
2.4 SPECIFIC USE
This machine is a floor scrubber-drier: it must be
used to scrub and to vacuum liquids of flat, rigid,
horizontal, smooth or moderately rough and uni-
form floors that are free from obstacles in both
civic and industrial environments. Any other use
is pro- hibited.
Please refer very carefully to the safety information
reported in this manual.
The scrubber-drier distributes a quantity of a water
and detergent solution (adjustable) on the surface
to be cleaned, while the brushes remove any dirt
on the ground. The machine’ s suction system,
using a ground squeegee, perfectly dries the liquids
and the dirt just removed from the front brushes
in a single pass.
By efficiently combining a cleaning detergent with
various types of brushes (or abrasive disks), the
machine can adapt to all the various combinations
of floors and dirt.
2.5 TECHNICAL MODIFICATIONS
This machine was designed and built in accordance
with the fundamental requirements for user safety
and health as set forth in European directives. For
this reason the CE mark was placed on the ID label.
The European directives to which the equipment
conforms are referenced in the Certificate of
con- formity annexed to this manual. This cer-
tificate will no longer be valid if the equipment is
modified in any way without the manufacturer’ s
prior au- thorization.
The manufacturer reserves the right to make tech-
nical modifications to the product, without prior
no- tice, in order to make the necessary technical
upgrades or improvements. For this reason, some
details of your machine may be different from the
information in the sales catalogues or from the il-
lustrations presented in this booklet. However, this
will not reduce safety or invalidate the information
supplied to this regard.
