28
4. HANDLING INFORMATIONS
4.1 PACKING LIFTING AND TRANSPORT
During all lifting or transport operations, make
sure that the packed machine is securely anchored
to prevent it from tipping over or falling acciden-
tally. Transport vehicle loading and unloading oper-
ations must be carried out with adequate lighting.
The packed machine must be handled using ade-
quate devices, making sure not to damage/strike
any part of the packing, not to tip it over and to be
very careful when placing it on the ground.
☞
All these instructions also apply to the batter-
ies and the battery charger.
4.2 CHECKS UPON DELIVERY
☞
When the goods are delivered (machine, bat-
tery or battery charger) by the transporter, care-
fully
check the condition of the packing and its con-
tents. If the contents have been damaged, notify
the transporter and reserve the right, in writing
(select the word “ reserve” on the document), to
submit a claim for compensation before accepting
the goods.
4.3 UNPACKING
Wear safety clothing and use adequate tools to
limit the risks of accidents.
The machine is packed with in a cardboard housing
placed on a wooden crate; to unpack the machine
carry out the following steps:
- Use scissors or clippers to cut and eliminate the
plastic straps.
- Slip off the cardboard housing from the top of
the packed machine.
- Remove the envelops inside and check their
con- tents (use and maintenance manual, bat-
tery charger connector)
- Remove the metallic brackets or plastic straps
that secure the machine to the pallet.
- Release the brushes and the squeegee from the
packing.
- Take the machine off the pallet (pushing it back-
ward) by using an inclined surface that is solidly
at- tached to the floor and to the pallet.
Keep all the pieces of the packing since they might
be useful in the future to protect the machine and
the accessories during transport to another loca-
tion or to authorized service centers. If not, the
packing can be disposed in accordance with current
disposal laws.
4.4 DIMENTIONS AND WEIGHT OF THE
PACKING
Volume:
1,26 m³
Weight: machine without batteries
Model 500 mm cleaning width
DC 24V power supply - without traction 129 kg
Model 500 mm cleaning width
DC 24V power supply - with traction
139 kg
Model 550 mm cleaning width
DC 24V power supply - without traction 135 kg
Model 550 mm cleaning width
DC 24V power supply - with traction
145 kg
Model 660 mm cleaning width
DC 24V power supply - with traction
158 kg
Model 660 mm cleaning width DC 24V power sup-
ply
with traction and actuator
160 kg
