Laurell Technologies
Quick Start WS-650 Series 10/2011 – 10070193.revL
All information contained in this manual is the property of Laurell Technologies Corporation® and is NOT to be edited, reproduced or
distributed without express written permission from a corporate officer.
- 16 -
INSTALLING THE FRAGMENT
ADAPTER
See section 3 in
manual for
installing and
removing chuck
Installed 1.75” (45mm)
chuck
Bottom view of
Fragment Adapter
With vacuum off,
place fragment adapter
onto the low profile
chuck
Place fragment on
chuck and press the
vacuum key on control
panel
CAUTION:
SUBSTRATE
FRAGMENT MUST
ALWAYS COVER
THE O-RING SEAL
TO PREVENT
CHEMICAL FROM
ENTERING
VACUUM PATH
AND DAMAGING
MOTOR AND
SEALS.
Contact
before running a
substrate that doesn’t
fit on chuck properly.
To remove fragment
adapter, turn off
vacuum and lift up.
