Laurell Technologies
Quick Start WS-650 Series 10/2011 – 10070193.revL
All information contained in this manual is the property of Laurell Technologies Corporation® and is NOT to be edited, reproduced or
distributed without express written permission from a corporate officer.
- 20 -
7.
From your Start menu, find & launch the
Keyspan USB Serial Adapter
Assistant
8.
Plug in the Keyspan adapter to a free USB port on your computer (connecting
to a USB hub is not recommended). After a minute or so, you should see a tray
notification indicating that your adapter is installed.
Note: If the above tray does not appear, do the following.
a.
Make note of the COM port that is idle. (See above, “COM 3 Idle”)
b.
Open up the Spin 3000 application
c.
Login into Spin 3000 using the password located on the front of the CD
sleeve.
d.
Click on “EDIT”
e.
Click on “RS-232 Interface”
f.
Change the COM port to the idle COM port
g.
When communication is established, a data stream will appear in the
lower “From Spin Processor” data window
Your computer should now be set up to interface with Laurell Technologies®
Spin 3000
software.
If you experience difficulties, support is available from the factory at:
