14
STORAGE OF THE IRONING SYSTEM
• Turn the device off using the main switch button.
• Remove the power plug and wind the power cord
around table supports. Pull the cable in order
to activate the automatic winder.
• Install the hose holder in a horizontal position
in the hole provided for this purpose.
• Place the iron into the box for safe storage.
Fold the stand intended for the iron to the closest
position Grab a side containing the stand with one
hand. Grab the edge of the table with the other
hand and fold it vertically.
• Place the system to a storage location
in the upright position Water in the tank can be left
until its next use.
If the device is stored in a horizontal position,
then water shall be drained from the tank.
Be sure to fill the tank with water before device
activation. Device activation without water may
cause damage. Activation of heating functions
without water may void the warranty provided
for the device.
USER INTERFACE
• Turning on/off
The light indicator flashes until the device is ready
for operation.
•
LauraStar Auto Steam Picto 01/09/16
SenSteam
The white light indicates activation of the SenSteam
function.
•
LauraStar Auto Picto 01/09/16
Impulse steam supply
The white light indicates activation of the pulse
steam function
• Fan speed switching
4 speed values are available. The white indicator
light indicates one of 4 speed values.
• Water light indicator
A red water light indicator implemented in the form
of a drop indicates absence of water in the tank.
TURNING THE DEVICE ON
• Connect the device to mains.
• In order to activate the automatic winding
function – pull the power cord until the end
of the cable is visible at the output of the coiler.
• Press the on/off button. The green indicator light
will flash for 3–5 minutes.
• The device is ready for operation when the green
indicator is lit continuously.
The system is turned off after 10 minutes
of inactivity for convenience and safety.
Press the steam button 2–3 times at a distance
from clothes before ironing or after a long pause.
This measure will remove condensation in the iron
and will help to avoid moisture stains on clothing.
