12
13
DEVICE PREPARATION
It is recommended to rinse the steam generator
prior to the first use.
• Make sure the device’s power plug is unplugged.
• Secure the table in the highest position, remove
the water tank.
• Place the drain tank under the drain plug.
• Unscrew the steam generator plug, remove
the drain plug.
• Remove the small and large water tank covers.
Remove the filter compartment and filter itself.
• Fill the tank with hot tap water to the maximum level
(MAX).
• Place a large funnel-shaped cover in a position
of the water tank above the steam generator
and locate the tank itself on the top.
• Drain all water.
• Install both covers back after all water is drained.
• Remove the drained water.
Do not use water with various additives
(for example, flavoured), chemicals or water
from drying machines, since such liquid may affect
operation of the device.
The device is intended to work with tap water.
Be sure to use the supplied scale filter for effective
and long-term operation of the device.
INSTALLATION OF THE SCALE
PROTECTION CARTRIDGE FILTER
• Make sure that the device’s power plug
is unplugged.
• Secure the table in the highest position.
• Remove the water tank. Remove water tank covers.
Install the scale filter.
• Fill the tank with tap water.
• Filtered water shall reach the maximum level
(MAX mark).
• Close covers and place the tank back onto
the steam generator.
• If water does not flow – immerse the anti-scale filter
cartridge into cold water for 3 minutes.
MOBILE APP
Download «BORK by Laurastar» mobile app and get
access to step-by-step instructions, video tutorials
and settings for your ironing systems.
The application is available in the App Store
and Google Play.
