15
LAUNCH
ROXIE W
User Manual
Stop
VIN Scan
VIN Identification function is reading the vehicle
information...
Dec 17 08:59 100%
V Q B E V T R T E L B A N C L K J
Figure 5-2
*Note: To detect more and accurate VINs, a stable network connection is highly
recommended for this function.
*CAUTION: Don’t connect or disconnect any test equipment with ignition on or engine
running.
A.
Once the system successfully obtains the VIN (Vehicle Identification Number)
information of the currently identified vehicle, it will continue scanning the
vehicle systems. After the scanning is complete, a diagnostic report will be
automatically generated and sent to your email box (if bound).
B. If the tool failed to access the VIN information
, the system will navigate to the
Job Menu.
5.3 View Reports
Tap “Report” on the Job Menu to check all diagnostic reports.
*Note: Since all reports are automatically generated and sent to your email inbox, you
can go to ROXIE-AIT management platform to mark the report type (Pre-repair report,
post-repair report and diagnostic session) to better identify it.