LAUNCH KES-200 Multimeter
C-7
data address will appear. The user may choose any
one among them. The address marked with ‘ * ’
means that there is data stored in it and the data can
be replayed.
To clear the saved waveform, move the cursor to the
selected address and then press [ERASE] key to
delete the corresponding data. The mark ‘ * ’ in front of
the address will also be cleared.
[7.PAGE] --picking up a saved waveform by page
number
Press [7] key, and then use [
▲
] [
▼
] keys to select
the desired page number which the user want to see.
Once the page number is selected, the corresponding
waveform will be displayed on the screen.
Viewing Help Information of
Oscilloscope
When the waveform is displayed, press [HELP] to see
the HELP menu as shown in Fig.2-11. Use [
▲
] [
▼
]
keys to select the help information.
Fig.2-11
Help Information On Oscilloscope Key
Select [1.SCOPE KEY HELP] to call up the help
menu. The user may select the numbered items for
description on the key functions by [
▲
] [
▼
] keys as
shown in Fig.2-12.
Fig.2-12
The function description includes 14 items for
NORMAL and HOLD mode:
Normal mode: 1.CHAN, 2.VOLT, 3.TIME, 4.GND,
5.ACDC, 6.TRIG, 0. HOLD
Hold mode: 0.GRID, 1. AUTO, 2.CURSOR, 3.ZOOM
OUT, 4.GND, 5.SAVE, 6.RCLL, 7.PAGE
To read the description for any item, use [
▲
] [
▼
]
keys to move the cursor to the desired one, and then
press [ENTER] key. It will display the description on
this function. For example, select [1.CHAN], the
description on this function will be displayed as shown
in Fig.2-13.
Fig.2-13
Use [
◄
] [
►
] keys to directly view the description on
other function or press [ESC] key to return to the
upper level menu.