© Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103
29
3.9
Installation LAN-/network card
proceed as follows to install the LAN-/network card(s):
•
following the installation of the operating system and the chipset
driver, the system automatically makes a link to a network connection.
You find the relevant icon (Network icon) in the right hand lower taskbar.
•
call-up the EXE-file from the drive-directory, drive E:\Driver\EPC-
PM\LAN for the installation of the second network card.
•
confirm each installation step and re-start the EPC PM at the end of
the installation.
•
After the re-start 2 new network icons appear in the right hand side
lower taskbar.
•
You can now configure both network cards to your own needs (IP-
address etc.) via the system control.
•
Via the MS-DOS window, under
Start -> accessories -> entry prompt,
you can set a „connection PING“. Herewith you can then test your
connections to the server and other PC’s.
(for example: C:\ping 192.168.5.100).
3
Putting in to operation