background image

1

1.

 

IMPORTANT SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly
handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN
RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the
following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of

your LCD TV product, please read the following precautions carefully before using the product.

1.Read instructions

—All operating instructions must be read and understood before the product is operated.

2.Retain instructions

—These safety and operating instructions must be kept in a safe place for future reference.

3.Observe warnings

—All warnings on the product and in the instructions must be observed closely.

4.Follow instructions

—All operating instructions must be followed.

5.Water  and  moisture

Do  not  use  this  product

near  water  -  for  example,  near  a  bathtub,  washbowl,
kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool, and the like.
Do  not  use  immediately  after  moving  from  a  low
temperature  to  high  temperature  environment,  as  this

causes  condensation,  which  may  result  in  fire,  electric
shock, or other hazards.
Moisture in rooms where the set is installed should not
exceed 85% humidity
Leave the condensation to evaporate before turning the
TV on again.

6.Cleaning

— 

Unplug this product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
Clean the screen with a glass care cleaner and the rest

of the set with a soft cloth and neutral detergent.
Regularly dust the vents at the back and sides. Using
solvents, abrasive or alcohol based products risk
damaging the TV.

Caution 

: the screen of your LCD TV may be damaged

if it is cleaned with strong detergents, alcohol or
abrasive products.

7.Ventilation

—The vents and other openings in the

cabinet are designed for ventilation. Do not cover or
block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the life
of the product. Do not place the product on a bed, sofa,

rug or other similar surface, since they can block
ventilation openings. This product is not designed for
built-in installation; do not place the product in an
enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s
instructions are followed.

8.Heat sources

—Keep the product away from heat

sources such as radiators, heaters, stoves and other
heat-generating products (including amplifiers).

The TV components are sensitive to heat. The
maximum ambient temperature should not exceed 35

0

celsius.

Summary of Contents for 20LCDB03B
























Reviews: