Models S 1200, S 2400, S 4400, POU 3300, POU 3500
-
6
-
2.
Installation
2.1.
Conditions of Use
Install this unit according to the following requirements.
DANGER:
Operating and maintenance personnel must receive proper training before
installing, troubleshooting, or maintaining high-energy electrical equipment.
Potentially lethal voltages could cause death, serious personal injury, or damage to
the equipment. Ensure that all appropriate safety precautions are taken.
DANGER:
RISK OF DEATH OR BODILY INJURY. Disconnect all sources of input power before
working on this unit or anything connected to it.
To be in compliance with the stated directives and standards, the following conditions of use
must be met:
Operate the point-of-use module only within a system configuration that contains
accessory components authorized and provided by LAUDA-Noah, LP, or one of its
authorized agents.
Install and operate this device in an over voltage category II installation only.
Install and operate this device only in a pollution degree 2 or better environment (an
indoor location such as a computer room, office, or factory floor), where only non-
conductive pollution occurs during operation.
To prevent toppling, the point-of-use module must also be securely mounted by a
bracket or in a subfloor tile mount.
When dealing with any fluids such as coolant or facility water, utilize PPE such as gloves
and protective eyewear to avoid direct contact with skin or eyes.