9
MachXO2-4000HC Control Development Kit
User Guide
9.
The HyperTerminal window appears.
10. From the MachXO2-4000HC Control Evaluation Board, press the reset push-button with reference designator
S1. The Control SoC demo main menu appears.
Setting Up Linux Minicom
Minicom is a terminal program found with most Linux distributions. It can be used to communicate with the
MachXO2-4000HC Control Evaluation Board.
To setup Minicom:
1.
Check active serial ports:
#dmesg | grep tty
Note the tty label assigned to the USB port
2.
From a command prompt, start Minicom:
#minicom –s
The configuration menu appears.
3.
Highlight Serial port setup and press
Enter
. Serial port settings appear.
4.
Press
A
(Serial Device). Specify the active serial device noted in Step 1 and press
Enter
.
5.
Press
E
(Bps/Par/Bits). Specify
115200
,
None
,
8
and press
Enter
.
6.
Press
F
(Hardware Flow Control). Specify
None
and press
Enter
.
7.
Press
Esc
. The configuration menu appears.
8.
Select
Save setup as dfl
. Minicom saves the port setup as the new default.
9.
Select
Exit
. The Minicom interface appears.
10. From the evaluation board, press the
S1
push-button (GSR).The Control SoC demo main menu appears.
Ordering Information
Description
Ordering Part Number
China RoHS Environment-Friendly
Use Period (EFUP)
MachXO2-4000HC Control Development Kit
LCMXO2-4000HC-C-EVN
