7
MachXO2-4000HC Control Development Kit
User Guide
Figure 4. J6 Header Used for Selecting the JTAG Port of the PLDs
Using Diamond Programmer software (included with the Diamond installation), users can scan and perform JTAG
operations, including programming, with the MachXO2 and POWR1014A devices.
Setting Up Windows HyperTerminal
You will use a terminal emulator program to communicate with the evaluation board. The following instructions
describe the Windows HyperTerminal program which is found on most Windows PCs. You may use another termi-
nal program if desired although setup will be different. Windows 7 does not include HyperTerminal. Tera Term has
been verified to work with Windows 7. For Linux, Minicom is a good alternative.
Note: This step uses the procedure for Windows XP users. Steps may vary slightly if using another Windows ver-
sion.
1.
From the
Start
menu, select
Control Panel > System
. The “System Properties” dialog appears.
2.
Select the
Hardware
tab and click
Device Manager
. The “Device Manager” dialog appears.
Figure 5. Device Manager – COM Port
3.
Expand the
Ports (COM & LPT)
entry and note the COM port number for the USB Serial Port.
4.
From the
Start
menu, select
Programs > Accessories > Communications > HyperTerminal
. The HyperTer-
minal application and a “Connection Description” dialog appear.
