2
MachXO2-4000HC Control Development Kit
User Guide
Introduction
Thank you for choosing the Lattice Semiconductor MachXO2™-4000HC Control Development Kit!
This guide describes how to start using the MachXO2-4000HC Control Development Kit, an easy-to-use platform
for rapidly prototyping system control designs using MachXO2 PLDs. Along with the evaluation board and accesso-
ries, this kit includes a pre-loaded control system-on-chip (Control SoC) design that demonstrates board diagnostic
functions including I/O control, voltage monitoring, time-stamps and data logging to non-volatile memory. The
Power Manager II ispPAC
®
-POWR1014A and 8-bit LatticeMico8™ microcontroller are featured in the board and
demonstration design.
The contents of this user’s guide include demo operation, top-level functional descriptions of the various portions of
the evaluation board, descriptions of the on-board connectors, switches, a complete set of schematics and bill of
materials for the MachXO2-4000HC Control Evaluation Board.
Note: Static electricity can severely shorten the lifespan of electronic components. See the MachXO2-4000HC
Control Development Kit QuickSTART Guide for handling and storage tips.
Features
The MachXO2-4000HC Control Development Kit includes:
•
MachXO2-4000HC Control Evaluation Board
– The MachXO2-4000HC Control Evaluation Board features the
following on-board components and circuits:
— MachXO2 LCMXO2-4000HC-csBGA132 PLD
— Power Manager II POWR1014A mixed-signal PLD
— 4 Mbit SPI Flash memory
— microSD (micro Secure Digital) memory socket
— Current and voltage sensor circuits
— Voltage ramp circuits
— Electret microphone
— Audio amplifier and Delta-Sigma ADC
— PWM analog output circuit
— Audio output channel
— Up to two DVI sources and one DVI output
— Up to two 7:1 LVDS sources and one 7:1:VDS output (e.g. Camera Link)
— Expansion header for JTAG, SPI, I
2
C and PLD I/Os
— LEDs and switches
— Standard USB cable for device programming
— RS-232/USB and JTAG/USB interface
— RoHS-compliant packaging and process
— AC adapter (international plugs)
•
Pre-loaded Reference Designs and Demo
– The kit includes the pre-loaded Control SoC demo design that
integrates several Lattice reference designs including: the LatticeMico8 microcontroller, master WISHBONE bus
controller, soft Delta-Sigma ADC, SPI master controller, UART peripheral, Embedded Block RAM and additional
control functions.
•
USB connector Cable
– A mini B USB port provides a communication and debug port via a USB-to-RS-232
physical channel and programming interface to the MachXO2 JTAG port.
•
AC Adapter
(international plugs) with 5 V DC output, center positive.
•
QuickSTART Guide
– Provides information on connecting the MachXO2-4000HC Control Evaluation Board,
installing Windows hardware drivers, and running the Control SoC demo.
